Events & Training
What's happening at RSD? Find more information about our events and training, like where, when, what and who to contact.
Also available are our promotional items, special programs, and Total Control DDC Automation Training
Technical Certification Program: Niagara 4 TCP Class (401)
The goal of the 5-day, Niagara 4 Technical Certification Training is to educate students to a basic level of technical expertise to effectively and efficiently design, engineer, and program projects using the Niagara 4 Framework. Students who pass the testing at the end of the class will receive a Certificate of Achievement testifying to their ability.
RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827
For more information contact:
Jordan Quigley
(916) 369-0203
jquigley@rsd.net
701 - HV600 HVAC Drives
This course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing, and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.
Intro to Pelican Wireless System
RSD is hosting an introduction to Pelican Wireless Thermostats and Wireless Controls training. The course provides an overview of the Pelican Zone Controllers. You will learn how to setup gateway, as well as program thermostats, shared schedules, and holidays. This training will show how this exciting new product can expand your sales in commercial building comfort solutions.
RSD Gilbert
1323 N. Tech Blvd.
Gilbert, AZ 85233
For more information contact:
Dan Weaver
(480) 969-9988
701 - HV600 HVAC Drives
This course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing, and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.
301 - Johnson Controls BACnet Configuration & Commissioning
This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.
Inverter Installation & Diagnostics
RSD is hosting a Bosch Inverter Installation and Diagnostics technical training. Bosch instructors will be covering proper installation techniques to avoid any start-up issues and unit failures. Technicians will learn how to navigate through the user interface to set up and diagnose troubleshooting along with any maintenances. Technicians will receive service manuals and a quick start guide to assist them in the field.
RSD Peoria
8952 W. Bloomfield Rd.
Peoria, AZ 85381
For more information contact:
John Myers
(623) 412-2189
Medium/Low Temperature Refrigeration
RSD is hosting an HTPG Intro to Medium and Low Temperature Refrigeration training. This course will cover vapor compression refrigeration cycle, specifically the efficient cooling system. It will also go over the Four Basic Components Roles: Compressor, Condenser, Expansion Valve/Device, and Evaporator. In addition a review understanding superheat, sub-cooling, and saturation.
RSD Corona
117 Via Trevizio
Corona, CA 92879
For more information contact:
Jeremy Hatfield
(951) 893-9215
301 Johnson Controls BACnet: Field Controller Configuration & Commissioning
Intensive 3-day training courses are offered so you know what you need to know to install, commission and service Johnson Control Metasys and Facility Explorer BACnet systems. Robert Vardell, a former field technician, controls engineer, Project Manager, Service Leader, small business owner, and Navy Chief, delivers a unique training experience for his students. Students come away with knowledge that is applicable to buildings you service, and relevant to your next project (Legacy N2 products are not included).
RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827
For more information contact:
Jordan Quigley
(916) 369-0203
jquigley@rsd.net
New Low GWP Refrigerants: Regulations and the Future
State an Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers and Refrigeration.
RSD Monterey Park
1201 Monterey Pass Rd.
Monterey Park, CA 91754
For more information contact:
Miguel Perez
(323) 264-2800
ECM Made Easy
RSD is hosting the most complete ECM motors training offered. This course will include an overview of ECM technology and will cover OEM ECM products & troubleshooting. This includes Identifying which type Genteq Evergreen preprogrammed replacements for 16-pin/4-pin Variable Speed ECM and X13/EnduraPro ECM. We will also demonstrate how to retrofit standard PSC motors to ECM motors: replace 98% of most commonly rated PSC motors with just 3; reduce truck stock inventory, complete the call the same day, and maintain higher revenue/happier customers.
RSD Van Nuys
16626 Arminta St.
Van Nuys, CA 91406
For more information contact:
Chris Munoz
(818) 902-9800
cmunoz@rsd.net
Inverter Installation & Diagnostics
RSD is hosting a Bosch Inverter Installation and Diagnostics technical training. Bosch instructors will be covering proper installation techniques to avoid any start-up issues and unit failures. Technicians will learn how to navigate through the user interface to set up and diagnose troubleshooting along with any maintenances. Technicians will receive service manuals and a quick start guide to assist them in the field.
RSD Tucson
303 S. Kino Pkwy
Tucson, AZ 85719
For more information contact:
John Lambert
(520) 623-5887
Inverter Installation & Diagnostics
RSD is hosting a Bosch Inverter Installation and Diagnostics technical training. Bosch instructors will be covering proper installation techniques to avoid any start-up issues and unit failures. Technicians will learn how to navigate through the user interface to set up and diagnose troubleshooting along with any maintenances. Technicians will receive service manuals and a quick start guide to assist them in the field.
RSD Gilbert
1323 N. Tech Blvd.
Gilbert, AZ 85233
For more information contact:
Dan Weaver
(480) 969-9988
901 - N4 Online Technical Certification Program
This 5-day blended E-learning, Niagara 4 Technical Certification Training facilitated remotely, is to educate students to a basic level of technical expertise to effectively and efficiently design, engineer, and program projects using the Niagara 4 Framework. Students who pass the testing at the end of the class will receive a Certificate of Achievement from Tridium testifying to their ability.
701 - HV600 HVAC Drives
This course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing, and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.
New Low GWP Refrigerants: Regulations and the Future
State an Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers and Refrigeration.
RSD San Jose
1050 Commercial St. Suite 105
San Jose, CA 95112
For more information contact:
JD Moss
(408) 297-9453
JB Principles of Vacuum
RSD is hosting a J/B Principles of Vacuum Training. The course provides an overview of best practices for pulling a proper vacuum quickly and efficiently. You will learn how to troubleshoot common vacuum pump problems and maintenance on how to make it last. This training will explain what a Vacuum Pump Tear-Down is, how it works, and why AHRI recommends you change your vacuum pump oil after every use.
RSD Peoria
8952 W. Bloomfield Rd.
Peoria, AZ 85381
For more information contact:
John Myers
(623) 412-2189
Yaskawa HV600 HVAC Drives
RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.
RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827
For more information contact:
Tom Hardy
(916) 369-0203
thardy@rsd.net
301 Johnson Controls BACnet: Field Controller Configuration & Commissioning
Intensive 3-day training courses are offered so you know what you need to know to install, commission and service Johnson Control Metasys and Facility Explorer BACnet systems. Robert Vardell, a former field technician, controls engineer, Project Manager, Service Leader, small business owner, and Navy Chief, delivers a unique training experience for his students. Students come away with knowledge that is applicable to buildings you service, and relevant to your next project (Legacy N2 products are not included).
RSD Total Control Fresno
5920 E. Shields Ave. Suite 101
Fresno, CA 93727
For more information contact:
Deven Putnam
(559) 291-1000
Compressor Operation & Service Seminar
This intensive & in-depth three-day program shows you how to adopt proper techniques & practices for the real-world environment with completely updated material & more emphasis on the latest technology. It includes overall system design, field service & troubleshooting skills, the latest Copeland compressor technology & applications, & a valuable failure analysis hands-on tear-down. Results include better customer service, more accurate diagnosis & more effective repairs to eliminate costly callbacks & increase technician productivity.
RSD Ontario
1705 E. Francis St.
Ontario, CA 91761
For more information contact:
Julio Felix
(909) 930-5552
701 - HV600 HVAC Drives
This course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing, and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.
New Low GWP Refrigerants: Regulations and the Future
State an Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers and Refrigeration.
RSD Livermore
1376 Stealth St.
Livermore, CA 94551
For more information contact:
Lisa Vegas
(925) 371-0955
JB Principles of Vacuum
RSD is hosting a J/B Principles of Vacuum Training. The course provides an overview of best practices for pulling a proper vacuum quickly and efficiently. You will learn how to troubleshoot common vacuum pump problems and maintenance on how to make it last. This training will explain what a Vacuum Pump Tear-Down is, how it works, and why AHRI recommends you change your vacuum pump oil after every use.
RSD Tucson
303 S. Kino Pkwy
Tucson, AZ 85719
For more information contact:
John Lambert
(520) 623-5887
Yaskawa HV600 HVAC Drives
RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.
RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827
For more information contact:
Tom Hardy
(916) 369-0203
thardy@rsd.net
Compressor Failure Analysis
RSD is hosting a hands-on compressor teardown training class with Copeland. The course will cover the causes and cures of compressor failure, lack of lubrication, and acid contamination. It will also go over the effects and indication of slugging, flood-back, loss of oil, and high discharge temperatures.
RSD Seattle
625 S. Industrial Way
Seattle, WA 98108
For more information contact:
Amel Djuldanic
(206) 623-8005
701 - HV600 HVAC Drives
This course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing, and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.
801 - Pelican Wireless Controls
This 2-1/2 hour training class provides an overview of the Pelican Products. You will learn how to setup a gateway, as well as program thermostats, shared schedules, and holidays. Discussion will include the initial site settings process and commission the system. This training will show how this exciting product can expand your sales in commercial building comfort.
801 - Pelican Wireless Controls
This 2-1/2 hour training class provides an overview of the Pelican Products. You will learn how to setup a gateway, as well as program thermostats, shared schedules, and holidays. Discussion will include the initial site settings process and commission the system. This training will show how this exciting product can expand your sales in commercial building comfort.
JB Principles of Vacuum
RSD is hosting a J/B Principles of Vacuum Training. The course provides an overview of best practices for pulling a proper vacuum quickly and efficiently. You will learn how to troubleshoot common vacuum pump problems and maintenance on how to make it last. This training will explain what a Vacuum Pump Tear-Down is, how it works, and why AHRI recommends you change your vacuum pump oil after every use.
RSD Gilbert
1323 N. Tech Blvd.
Gilbert, AZ 85233
For more information contact:
Dan Weaver
(480) 969-9988
Yaskawa HV600 HVAC Drives
RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.
RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827
For more information contact:
Tom Hardy
(916) 369-0203
thardy@rsd.net
Heatcraft Counter Day: IntelliGen Evaporator Contractor
RSD is hosting a Heatcraft Counter Day event. Here you will learn about their latest innovations, including how they work and where you can find success with each product. You will also have the opportunity to learn and have a hands-on demonstration over Heatcraft's IntelliGen Refrigeration Controller. This is an opportunity to have any questions you may have answered about Heatcraft products.
RSD Anchorage
520 W. 41st Ave. Unit A
Anchorage, AK 99503
For more information contact:
Michael Wyatt
(907) 563-5604
Compressor Failure Analysis
RSD is hosting a hands-on compressor teardown training class with Copeland. The course will cover the causes and cures of compressor failure, lack of lubrication, and acid contamination. It will also go over the effects and indication of slugging, flood-back, loss of oil, and high discharge temperatures.
RSD Tigard
7244 S.W. Durham Rd. Suite 500
Tigard, OR 97224
For more information contact:
Brian Stanfill
(503) 684-5600
Yaskawa HV600 HVAC Drives
RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.
RSD Sparks
1650 Hymer Ave.
Sparks, NV 89431
For more information contact:
Brian Seelkoke
(775) 329-1067
Inficon Proper Leak Detection
RSD is hosting an Inficon proper leak detection class. The training provides an overview of various methods of leak detection. It will offer a better understanding of the advantages and disadvantages of those methods and best practices for all applications. This will demonstrate the proper way to setup and maintain these tools for the best results in the field. This is a great opportunity for all levels of experience to become more proficient at leak detection.
RSD Peoria
8952 W. Bloomfield Rd.
Peoria, AZ 85381
For more information contact:
John Myers
(623) 412-2189
Air Flow/A2L Refrigerant Overview
RSD is hosting an Air Flow Troubleshooting and A2L Refrigerant Overview. The course will provide a better understanding over unit Air Flow diagnosis/troubleshooting and A2L product transition schedule and sell-throughs. This will also discuss topics on how to measure static pressure, gain the ability to use the tools to take the measurements correctly, and perform hands on Air Flow measurements using some of the basic tools in the industry.
RSD San Diego Kearny Mesa
7332 Convoy Ct. Unit A
San Diego, CA 92111
For more information contact:
Juan Espadas
(858) 565-7191
Viper Counter Day: Nu-Calgon
RSD is hosting a Counter Day event with Viper. Here you will learn about their latest innovations, including how they work and where you can find success with each product. Products like the Viper coil and condenser cleaner, WetRag putty, Heatshield blanket, and full lineup of HVAC/R maintenance solutions. This is an opportunity to have any questions you may have answered about Viper products.
RSD Pomona
680 Union Ave.
Pomona, CA 91768
For more information contact:
Jacob Massey
(909) 397-0470
Yaskawa HV600 HVAC Drives
RSD is hosting a HV600 HVAC drives training with Yaskawa. The course provides technicians and engineers required training and testing to become Yaskawa HV600 HVAC certified. It will offer a better understanding of model number breakdown, drive sizing and selection, chassis types, bypass components, I/O, and monitoring. You will also learn drive startup programming, wiring, troubleshooting, solutions for drive/bypass fault codes, and use of the Drive Wizard software.
RSD Sparks
1650 Hymer Ave.
Sparks, NV 89431
For more information contact:
Brian Seelkoke
(775) 329-1067
New Low GWP Refrigerants: Regulations and the Future
State an Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers and Refrigeration.
RSD Bakersfield
621 E. 21st St.
Bakersfield, CA 93305
For more information contact:
Mark Miranda
(661) 325-7421
Aftermarket PSC/ECM Training
RSD is hosting an aftermarket PSC/ECM motor class. The course will provide a basic understanding of ECM motors and how they operate. It will offer a better understanding of the difference between PSC versus ECM motors. Topics on how to replace a PSC motor with an ECM motor, as well as an OEM motor with an aftermarket ECM for half the price will also be covered.
RSD Sparks
1650 Hymer Ave.
Sparks, NV 89431
For more information contact:
Brian Seelkoke
(775) 329-1067
Inficon Proper Leak Detection
RSD is hosting an Inficon proper leak detection class. The training provides an overview of various methods of leak detection. It will offer a better understanding of the advantages and disadvantages of those methods and best practices for all applications. This will demonstrate the proper way to setup and maintain these tools for the best results in the field. This is a great opportunity for all levels of experience to become more proficient at leak detection.
RSD Tucson
303 S. Kino Pkwy
Tucson, AZ 85719
For more information contact:
John Lambert
(520) 623-5887
Air Flow/A2L Refrigerant Overview
RSD is hosting an Air Flow Troubleshooting and A2L Refrigerant Overview. The course will provide a better understanding over unit Air Flow diagnosis/troubleshooting and A2L product transition schedule and sell-throughs. This will also discuss topics on how to measure static pressure, gain the ability to use the tools to take the measurements correctly, and perform hands on Air Flow measurements using some of the basic tools in the industry.
RSD Corona
117 Via Trevizio
Corona, CA 92879
For more information contact:
Jeremy Hatfield
(951) 893-9215
Copeland Scroll Compressor Troubleshooting
RSD is hosting a scroll compressor troubleshooting training with Copeland. The course will cover troubleshooting and diagnosing failures with Copeland scroll compressors. This will provide a better understanding of the causes and cures of compressor failure, lack of lubrication, and acid contamination. It will also go over the effects and indication of slugging, flood-back, loss of oil, and high discharge temperatures.
RSD Temecula
43300 Business Park Dr. Suite 102
Temecula, CA 92590
For more information contact:
Joshua Garcia
(951) 694-0300
New Low GWP Refrigerants: Regulations and the Future
State an Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers and Refrigeration.
RSD Visalia
9946 W. Nicholas Ave.
Visalia, CA 93291
For more information contact:
Gary Guron
(559) 651-0635
Aftermarket PSC/ECM Training
RSD is hosting an aftermarket PSC/ECM motor class. The course will provide a basic understanding of ECM motors and how they operate. It will offer a better understanding of the difference between PSC versus ECM motors. Topics on how to replace a PSC motor with an ECM motor, as well as an OEM motor with an aftermarket ECM for half the price will also be covered.
RSD Roseville
640 Commerce Dr.
Roseville, CA 95678
For more information contact:
Chad McAfee
(916) 780-7220
Inficon Proper Leak Detection
RSD is hosting an Inficon proper leak detection class. The training provides an overview of various methods of leak detection. It will offer a better understanding of the advantages and disadvantages of those methods and best practices for all applications. This will demonstrate the proper way to setup and maintain these tools for the best results in the field. This is a great opportunity for all levels of experience to become more proficient at leak detection.
RSD Gilbert
1323 N. Tech Blvd.
Gilbert, AZ 85233
For more information contact:
Dan Weaver
(480) 969-9988
Aftermarket PSC/ECM Training
RSD is hosting an aftermarket PSC/ECM motor class. The course will provide a basic understanding of ECM motors and how they operate. It will offer a better understanding of the difference between PSC versus ECM motors. Topics on how to replace a PSC motor with an ECM motor, as well as an OEM motor with an aftermarket ECM for half the price will also be covered.
RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827
For more information contact:
Dima Shalko
(916) 369-0203
dshalko@rsd.net
Air Flow/A2L Refrigerant Overview
RSD is hosting an Air Flow Troubleshooting and A2L Refrigerant Overview. The course will provide a better understanding over unit Air Flow diagnosis/troubleshooting and A2L product transition schedule and sell-throughs. This will also discuss topics on how to measure static pressure, gain the ability to use the tools to take the measurements correctly, and perform hands on Air Flow measurements using some of the basic tools in the industry.
RSD Monterey Park
1201 Monterey Pass Rd.
Monterey Park, CA 91754
For more information contact:
Miguel Perez
(323) 264-2800
Aftermarket PSC/ECM Training
RSD is hosting an aftermarket PSC/ECM motor class. The course will provide a basic understanding of ECM motors and how they operate. It will offer a better understanding of the difference between PSC versus ECM motors. Topics on how to replace a PSC motor with an ECM motor, as well as an OEM motor with an aftermarket ECM for half the price will also be covered.
RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827
For more information contact:
Dima Shalko
(916) 369-0203
dshalko@rsd.net
New Low GWP Refrigerants: Regulations and the Future
State an Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers and Refrigeration.
RSD Fresno East
5920 E. Shields Ave. Suite 101
Fresno, CA 93727
For more information contact:
Jon Sloan
(559) 291-1300
Belimo 101
RSD is hosting a 101 class on Belimo valves and actuators. This will give a better understanding of control types and which applications to use. Here you will learn about basic troubleshooting, select control signals, mount and wire both fail safe and non-fail safe actuators, sizing based on damper torque requirements, and the difference between fail safe and non-fail safe actuators. You will also learn the key differences on 2, 3, & 6-way valves, how to size a damper, and how to mount and wire spring and non-spring return actuators.
RSD San Diego Kearny Mesa
7332 Convoy Ct. Unit A
San Diego, CA 92111
For more information contact:
Juan Espadas
(858) 565-7191
JB Service Day
Bring your vacuum pumps, micron gauges, and/or low loss charging hoses for a free inspection performance test and oil change. All vacuum pump brands are serviced. Micron gauges and hose service are limited to only J/B products. Free replacement of normal wear and tear items on J/B vacuum pumps. Also, come see and learn about the latest lineup of J/B vacuum and charging products.
RSD San Jose
1050 Commercial St. Suite 105
San Jose, CA 95112
For more information contact:
JD Moss
(408) 297-9453
301 - Johnson Controls BACnet Configuration & Commissioning
This class is focused on field level applications for equipment controllers. Follow a simple Q/A program to build and test your own HVAC control strategies, customize your own, or both! Learn about Facility Explorer BACnet MS/TP Field Equipment Controllers, configuration and commissioning of them used in your facilities. Class size limited to 8 to improve the learning experience.
301 Johnson Controls BACnet: Field Controller Configuration & Commissioning
Intensive 3-day training courses are offered so you know what you need to know to install, commission and service Johnson Control Metasys and Facility Explorer BACnet systems. Robert Vardell, a former field technician, controls engineer, Project Manager, Service Leader, small business owner, and Navy Chief, delivers a unique training experience for his students. Students come away with knowledge that is applicable to buildings you service, and relevant to your next project (Legacy N2 products are not included).
RSD Total Control Lake Forest
25921 Atlantic Ocean Dr.
Lake Forest, CA 92630
For more information contact:
Greg Kobrak
(949) 301-4483
gkobrak@rsd.net
Air Flow/A2L Refrigerant Overview
RSD is hosting an Air Flow Troubleshooting and A2L Refrigerant Overview. The course will provide a better understanding over unit Air Flow diagnosis/troubleshooting and A2L product transition schedule and sell-throughs. This will also discuss topics on how to measure static pressure, gain the ability to use the tools to take the measurements correctly, and perform hands on Air Flow measurements using some of the basic tools in the industry.
RSD Thousand Palms
30571 Front St.
Thousand Palms, CA 92276
For more information contact:
Luis Gonzalez
(760) 343-1600
Aftermarket PSC/ECM Training
RSD is hosting an aftermarket PSC/ECM motor class. The course will provide a basic understanding of ECM motors and how they operate. It will offer a better understanding of the difference between PSC versus ECM motors. Topics on how to replace a PSC motor with an ECM motor, as well as an OEM motor with an aftermarket ECM for half the price will also be covered.
RSD Temecula
43300 Business Park Dr. Suite 102
Temecula, CA 92590
For more information contact:
Joshua Garcia
(951) 694-0300
Sub-cooling & Superheat Saturation
This Testo program is for the HVAC professionals who want to learn more about the Pressure/Temperature Relationships in AC, Refrigeration systems, and how to correctly measure the performance of the system by looking at Superheat and Sub-Cooling. The course offers a better understanding of the refrigeration cycle, its components, and analog gauges vs. digital manifolds. It will provide a collection of knowledge in the Laws of Refrigeration and Heat Transfer.
RSD Boise
423 N. Mitchell St.
Boise, ID 83704
For more information contact:
Anthony Ramirez
(208) 378-9940
Open House
The staff at RSD-Total Control cordially invites you to attend an open house. Join us as we welcome a number of manufacturers, who will be presenting their products. Come meet the people you may have only had the chance to talk on the phone with or e-mail. Lunch starts at 11:15am, so bring your appetite.
RSD Sparks
1650 Hymer Ave.
Sparks, NV 89431
For more information contact:
Brian Seelkoke
(775) 329-1067
Importance of Combustion Testing
RSD is hosting a combustion-testing seminar with Testo. The course provides a collection of knowledge in instrumentation maintenance, calibration, service and insights into applying these efficiently. It will offer a better understanding of the basic theories of combustion and hazards of carbon monoxide. This is a NATE certified class.
RSD Boise
423 N. Mitchell St.
Boise, ID 83704
For more information contact:
Anthony Ramirez
(208) 378-9940
Open House
The staff at RSD-Total Control cordially invites you to attend an open house. Join us as we welcome a number of manufacturers, who will be presenting their products. Come meet the people you may have only had the chance to talk on the phone with or e-mail. Lunch starts at 11:15am, so bring your appetite.
RSD Rancho Cordova
10170 Croydon Way Suite I
Rancho Cordova, CA 95827
For more information contact:
John Pullin
(916) 369-0203
Fundamentals of Refrigeration
RSD is hosting a fundamentals of refrigeration knowledge seminar with Heatcraft. The course provides an overview on the basics of refrigeration principles and problem solving. It will offer a better understanding of the refrigeration cycle, sub-cooling, thermodynamics, superheat and its importance.
RSD Boise
423 N. Mitchell St.
Boise, ID 83704
For more information contact:
Anthony Ramirez
(208) 378-9940
IntelliGen Refrigeration Controller
RSD is hosting an IntelliGen refrigeration controller workshop with Heatcraft. This hands-on training provides an in-depth insight over IntelliGen's features, benefits, and technical information. It will offer a better understanding of installation guidelines/setup, programming menus, operation sequence, diagnosis, and remote access.
RSD Boise
423 N. Mitchell St.
Boise, ID 83704
For more information contact:
Anthony Ramirez
(208) 378-9940
JB Principles of Vacuum
RSD is hosting a J/B Principles of Vacuum Training. The course provides an overview of best practices for pulling a proper vacuum quickly and efficiently. You will learn how to troubleshoot common vacuum pump problems and maintenance on how to make it last. This training will explain what a Vacuum Pump Tear-Down is, how it works, and why AHRI recommends you change your vacuum pump oil after every use.
RSD Boise
423 N. Mitchell St.
Boise, ID 83704
For more information contact:
Anthony Ramirez
(208) 378-9940
Harris Alloys Training Workshop
This will be a hands-on training on aluminum-to-aluminum brazing, copper-to-copper brazing, and the proper safety, setup, and use of oxygen and fuel equipment. Technicians will learn the six fundamental steps for brazing and how to masterly braze and solder techniques for your application. Attendees will receive recommendations for equipment and consumables specific to each operation as well as a NATE Continuing Education Hour Credits for applicable courses
RSD Boise
423 N. Mitchell St.
Boise, ID 83704
For more information contact:
Anthony Ramirez
(208) 378-9940
RUUD Mid and High Seer Inverter
RSD is hosting a Pelican Wireless Thermostats and Wireless Controls training. The course provides an overview of the Pelican Products. You will learn how to setup gateway, as well as program thermostats, shared schedules, and holidays. This will discuss the initial site settings process and commission the system. This training will show how this exciting product can expand your sales in commercial building comfort solutions.
RSD Boise
423 N. Mitchell St.
Boise, ID 83704
For more information contact:
Anthony Ramirez
(208) 378-9940
Intro to HV600 Drive
RSD is hosting an intro to HV600 HVAC drives training with Yaskawa. The course will offer a a general understanding on keypad use, initial setup, real-time clock, and navigating menus over the Yaskawa HV600 drive model. You will also learn about diagnostic tools, backing up parameters, modifying parameters/fault-logs, auto-tuning, and use and features of the Drive Wizard software.
RSD Seattle
625 S. Industrial Way
Seattle, WA 98108
For more information contact:
Amel Djuldanic
(206) 623-8005
RUUD Air Flow Basics
RSD is hosting an Air-Flow trouble shooting class. We will discuss the basics of unit air flow diagnosis and perform hands on air flow measurements using some of the basic tools used to measure air flow. Technicians will walk away with a better understanding on how to measure static pressure and the ability to use the tools to take the measurements correctly.
RSD Boise
423 N. Mitchell St.
Boise, ID 83704
For more information contact:
Anthony Ramirez
(208) 378-9940
Viper Counter Day: Nu-Calgon
RSD is hosting a Counter Day event with Viper. Here you will learn about their latest innovations, including how they work and where you can find success with each product. Products like the Viper coil and condenser cleaner, WetRag putty, Heatshield blanket, and full lineup of HVAC/R maintenance solutions. This is an opportunity to have any questions you may have answered about Viper products.
RSD Ontario
1705 E. Francis St.
Ontario, CA 91761
For more information contact:
Julio Felix
(909) 930-5552
New Low GWP Refrigerants: Regulations and the Future
State an Federal regulations are now in place to phase down/phase out the use of high GWP HFC refrigerants. These regulations will impact new systems, on going service and retrofits. This class will introduce you to the next generation of A1 - A2L & Natural Refrigerants and their adoption in AC, Heat Pumps, Chillers and Refrigeration.
Coast Inn at Lake Hood: 3450 Aviation Ave
Anchorage, AK 99502
For more information contact:
Michael Wyatt
(907) 563-5604
Viper Counter Day: Nu-Calgon
RSD is hosting a Counter Day event with Viper. Here you will learn about their latest innovations, including how they work and where you can find success with each product. Products like the Viper coil and condenser cleaner, WetRag putty, Heatshield blanket, and full lineup of HVAC/R maintenance solutions. This is an opportunity to have any questions you may have answered about Viper products.
RSD Corona
117 Via Trevizio
Corona, CA 92879
For more information contact:
Jeremy Hatfield
(951) 893-9215
Pelican Wireless System
RSD is hosting a Pelican Wireless Thermostats and Wireless Controls training. The course provides an overview of the Pelican Products. You will learn how to setup gateway, as well as program thermostats, shared schedules, and holidays. This will discuss the initial site settings process and commission the system. This training will show how this exciting product can expand your sales in commercial building comfort solutions.
RSD Boise
423 N. Mitchell St.
Boise, ID 83704
For more information contact:
Anthony Ramirez
(208) 378-9940
901 - N4 Online Technical Certification Program
This 5-day blended E-learning, Niagara 4 Technical Certification Training facilitated remotely, is to educate students to a basic level of technical expertise to effectively and efficiently design, engineer, and program projects using the Niagara 4 Framework. Students who pass the testing at the end of the class will receive a Certificate of Achievement from Tridium testifying to their ability.
801 - Pelican Wireless Controls
This 2-1/2 hour training class provides an overview of the Pelican Products. You will learn how to setup a gateway, as well as program thermostats, shared schedules, and holidays. Discussion will include the initial site settings process and commission the system. This training will show how this exciting product can expand your sales in commercial building comfort.
901 - N4 Online Technical Certification Program
This 5-day blended E-learning, Niagara 4 Technical Certification Training facilitated remotely, is to educate students to a basic level of technical expertise to effectively and efficiently design, engineer, and program projects using the Niagara 4 Framework. Students who pass the testing at the end of the class will receive a Certificate of Achievement from Tridium testifying to their ability.
906 - CIPer30 Factory Certification
Class topics include Model 30 Specifications and Overview, Networking Fundamentals including TCP/IP, DHCP, DNS, NAT and ARP, Network Architecture including Routing, Switching, and Bridging, and Network Fault Tolerance using the Rapid Spanning Tree Protocol, Network Security including SSL, TLS, and Certificates. Other topics included per the Honeywell Factory Course Materials. Student needs a laptop for class with N4.10 or later Webs license.